Pump System & Temperature Controller for HPLC-ECD

The ultra-high sensitivity of Eicom ECD-700 is supported by these two components.

HPLC Pump System Model EP-700

•  No pulsation damper necessary and computerized pulsation quenching system equipped.
• Online degassing unit with 2 channels included.
• Optional additional pump can be added; in total 2 pumps can be built in for either a gradient mode or two isocratic modes.
• Select from two models, micro flow type and high flow type, depending on the flow rate. See below.

Specifications

• Reciprocal dual piston pump
• Recommended usage range of flow rate
  • Micro flow type 100 to 500 µL/min with 1 µL/min increments
  • High flow type 0.5 to 3.00 mL/min with 0.01 ml/min increments
• Degassing chamber volume; 300 µL x 2 channels
• Dimension; 400 (w) x 400 (d) x 190 (h) mm
• Weight ; about 13 kg with one pump,  about 16 kg with two pumps.
• Power Supply; AC 100-240 V, 50/60 Hz, 200 VA

>ECD-700  >Stand-Alone HPLC-ECD

Temperature Controller Model ATC-700

• Works to control the temperature of the columns and ECD flow cells.
• The built-in program observes a 0.05°C difference and controls the temperature.
• Capacity for two 25 cm columns.

• Air circulation system with peltier element for cooling and heating
• Setting Range; 15 to 55°C
• Recommended Range; 20 to 45°C at 25°C ambient
• Dimension; 400 (w) x 400 (d) x 145 (h) cm
• Weight; about 10 kg
• Power Supply; AC 100-240 V, 50/60 Hz, 210 VA

>ECD-700  >Stand-Alone HPLC-ECD

700 Series