view cart

view cart

     


USA Toll Free (888) 680-7775

 

In Vivo Biosensors

These Blue Box Sensors can be used for a long term in vivo monitoring and other applications.

 

Potentiostat and Data Acquisition System

We provide sensitive preamps with potentiostat and data acquisition software. Please contact us for more detail.

data acquisition system

Glucose Sensors

Glucose oxidase is immobilized on a platinum-irridium electrode. The lowest detection limit is at 3.5 µM. Sensitivity is at nA/µM. The sensor is independent of the variations in ascorbic acid and oxygen concentrations found in the brain. It does not perform under anoxic conditions, but can be used under mild hypoxia. Stable measurements can be made for 2-3 months after implant. Reference and counter electrodes are required. Product Sheet

Discount: Larger Qty value will show lower unit price.

US Price  $237.50
Qty

Nitric Oxide Sensors

Works for in vivo monitoring of nitric oxide. Nafion coated platinum-iridium electrode with a 175 μm OD. The patented method of coating the sensors with Nafion reduces interference from ascorbic acid and others to negligible levels. Only small gaseous molecules can pass the membrane. The sensors have a sensitivity of approximately 1.5 nA per µM dissolved NO. This allows concentration changes of <6 nM to be resolved with our combined sensor/potentiostat system. Works for 4 weeks after implant. Reference and counter electrodes are required. Product Sheet  

Discount: Larger Qty value will show lower unit price.

US Price  $237.50
Qty

Oxygen Sensors <Type 1/CPE>

The measuring surface (Φ200 µm ) consists of a carbon paste electrode (CPE) and is inert to fouling. It allows for more than 6 months of sustained, stable oxygen measurements once implanted. Dissolved oxygen can be measured reliably over the full physiological range. The resolution of our electrodes is approximately 1.5 nA/µM dissolved oxygen at -900 mV. Reference and counter electrodes are required. Product Sheet

Discount: Larger Qty value will show lower unit price

US Price  $372.00
Qty

Oxygen Sensors <Type 2/Polymer>

The type 2 is constructed of a platinum/iridium wire that is coated with a polymer layer and has a shorter life span (4-6 weeks) when implanted in vivo. The dimensions are 125 μm diameter and are typically supplied as 3cm or 4cm in length. If you require a different length for your specific purposes, please contact us. Dissolved oxygen can be measured reliably over the full physiological range.Product Sheet

Discount: Larger Qty value will show lower unit price.

 

US Price  $160.00
Qty

Blue Box, Counter Electrode

Discount: Larger Qty value will show lower unit price.

US Price  $102.50
Qty

Blue Box, Silver Reference Electrode

Discount: Larger Qty value will show lower unit price.

US Price  $102.50
Qty